inspection standards for wire harness processing plant for copper wire-凯时6

kunshan l-lian gu electronics technology co., ltd.
131-5115-0271

news

inspection standards for wire harness processing plant for copper wire

  21

the copper wire is a part of the wire harness. the quality of the copper wire is related to the quality of the wire harness. therefore, the wire harness manufacturer needs to have a test standard for the copper wire. so what are the standards like this?

1. appearance inspection

put the spools filled with copper wire on the packing table, one hand holding a white paper in the distance of 1 to 2 centimeters from the copper wire, and the other hand rolling the thread of the copper wire for a week, and then to see if the appearance of the wire has reached the following criteria.

(1) the surface should be smooth, there is no disorder, no oxidation, and no scratches and so on.

(2) the line should be uniform, no stacking and lack of edges.

(3) tension should be moderate, not too loose or too tight.

(4) the surface of copper wire can not be sticky after rolling.

2, detection of line diameter

line diameter should be manufactured according to national standards. if customers have special requirements, they must be strictly controlled according to their requirements. the specific steps are as follows:

(1) first adjust whether the micrometer is zero.

(2) place the copper wire that needs to be inspected outside the clamp line of the micrometer, and twist the micrometer's end with proper force.

(3) if you hear the three sound of the micrometer, you should immediately observe its reading.

(4) repeated tests should be repeated until the readings are available. each time, the same location can not be detected.

3. test of elongation

the elongation should be tested according to the relevant national standards. if customers have special requirements, they must be strictly controlled according to the requirements. the specific steps are as follows:

(1) switch on the elongation tester

(2), check the wire on the left of the copper wire is not in the original position, the reading on the instrument is not zero, if the left clip is not in the original place, and the readings of the instrument have not returned to zero, then press the zero key and restore the key immediately.


remarks:

1. oem service is acceptable.

2. you can appoint us to use materials as your requirement : such as jst, molex and amp etc which enjoys high reputations.

3. smallorders on variety are acceptable.

4. please don’t hesitate to contact us for professional drawings and quotation based on your requirement.

kunshan l-lian gu electronics technology co., ltd. is a wire harness processing plant that specializes in electronic wiring harness processing. the company provides products such as industrial control line, uncalibrated line, medical equipment customization line, industrial equipment custom line, automobile electronic line and so on. service hotline: 131-5115-0271


column

contact

  • phone:131-5115-0271 / 0512-50703345
  • e-mail:rex.ding@ksxlg.cn
  • address:no.38, wulian road, yushan town, kunshan city, suzhou, jiangsu province, china